Hydraulic Bicycle Brakes and Parts
Hydraulic bicycle brakes transmit lever force to the caliper through fluid pressure. This category includes complete disc brake sets as well as maintenance parts like olives, cable ends, banjo bolts, and seals; the connections of road and mountain bike systems vary depending on the model.
Hydraulic Bicycle Brakes and Parts collection
Shimano Olive and Connectors SM-BH59
Shimano SM-BH59/90 Olive 1 Piece
Shimano Deore XT Banjo Bolt and O-Ring Set BR-M985 / BR-M8000 Y8JA98030
Shimano Mt-200 Hydraulic Disc Brake Kit Front Left
Shimano Dura-Ace ST-R9120 Hydraulic Bleed Screw and O-Ring Y0C698030
Shimano Caliper Screw 30mm BR-RS505 Fixing Bolt C Y8N208030
Shimano BR-MT200 Hydraulic Disc Brake Caliper

Everything About Cycling Clothing
Browse the Collection
Shimano TL-BR003 Hydraulic Oil Change Funnel
Sram Red Stage hydraulic hose Screw 5 Pieces
Shimano Mt-200 Rear Right Hydraulic Disc Brake Set
Shimano SLX Front Hydraulic Disc Brake Set BL-M7100 1000mm IM7100JLFPRA100
Shimano Disc Mount Adapter 160mm SM-MA-R160 Flat Mount
Shimano Hydraulic Mineral Brake Oil 100ml ISMDBOIL01M
Sram DB6 Hydraulic Disc Brake Set Front Rear Set Mineral
Shimano Hydraulic Mineral Low Visc Brake Fluid 100ml ISMLVOIL01M
Shimano BL-M4100 Left Hydraulic Disc Brake Lever EBLM4100LL
Sram DB8 Hydraulic Disc Brake Set Front Rear Mineral
Shimano Ultegra Di2 Right Shift Brake Lever ST-R8170 / BR-R8170 12V
Shimano Ultegra Di2 Left Shift Brake Lever ST-R8170 - BR-R8170 IR8170DLF6SC100F
Shimano Dura-Ace Di2 ST-R9270-R Right Gear Brake Lever IR9270DRRDSC170F
Shimano Tourney Stef41L 3S LEFT Shift Brake Lever Black
Shimano STEF41 Right Shift Brake Lever Set 7 Gear
Component compatibility is important in hydraulic systems
Choosing hydraulic brakes is not limited to just the caliper or lever model. The hose, connection tip, olive, and fluid used must also be compatible with the system. Evaluate the examples of SM-BH59, SM-BH90, and banjo connections in the collection with their exact part codes. When selecting a set, check which side it covers and the hose length in the product description.
- Verify the compatibility of the lever and caliper when used together.
- Match the hose model and end fittings with the manufacturer's information.
- Use only the specified fluid type for the relevant brake.
- Also check the compatibility of the rotor, adapter, and brake pad with the system.
Is the same oil used for every hydraulic brake?
No. The type and properties of the fluid are determined by the model. Do not mix different types; follow the brake manufacturer's specified product and service procedure.
Is it sufficient to just check when a new hose is installed?
In addition to installation, the manufacturer's prescribed bleeding and adjustment procedures may be required. Do not ride before verifying connection sealing and brake operation; obtain proper service support.


















































































