Buzz Rack Eazzy 2 Tow Bar Bicycle Carrier Rear of Vehicle

Buzz Rack Towbar Bike Carrier Eazzy 2
The fully foldable EAZZY series offers convenient assembly, user-friendly functions and compact storage. The ratchet cradle is the perfect solution for safely securing your bike.

It is also a great solution for carbon frame bikes as it does not put pressure on the carbon tubes.

The BUZZRACK Eazzy 2 is a truly well thought out and designed piece of kit; clever, sophisticated and great value for money.

EAZZY 2 has been awarded the 2019 BRISBANE GOLD DESIGN AWARD.

Basic ergonomics

Easy! Eazzy 2 is very easy to fold, which offers easy lifting, easy carrying, easy assembly, easy storage in the car trunk when you go for a drive.

It can be folded to be stored in the car. This is really handy because with a carrier attached to the vehicle, there is a risk of damage to your carrier and towbar in car parks with other vehicles. A towbar carrier will definitely make your car too long for a standard car park.

More details about folding: The wheel holder parts can be folded towards the main body and connected with a strap, making it easier to carry with the wheels under the main body. The Eazzy 2 is very easy to carry, easy to assemble, disassemble and store. The metal parts are steel, not aluminum, but since it is lifted vertically with 2 hands, it feels surprisingly light and there should be no strain on your back when moving and assembling it.

Key features of Eazzy 2

Assembly: The Eazzy 2 comes fully assembled. All you have to do is install the lights and the license plate holder, which are attached with just 1 screw on each side.

Mounting to the vehicle: You can easily mount the Eazzy 2 when it is folded, so you have all the space you need to work on the towbar attachment system. When you first place it on the towball it supports itself – you can just let it go and it won’t fall to the ground. You can then take the weight back, turn the tightening wheel until it is tight and lock it. BUZZRACK’s carriers comply with the very exacting standard XPR-18-904-4 and therefore include an anti-sway tensioner; this has an integrated handle and usually 2 or 3 turns are sufficient. The video below shows the mounting to the vehicle and the installation on the bike.

Lighting system: The Eazzy 2 comes with a 13-pin lighting system including reverse light and UK-compliant fog lights. 13 pin to 7 pin adapter not included.

Tilting: Tilting is easy and very well balanced even under full load. The Eazzy 2 sits very high on the tow ball and the tilt function is optimised to prevent the lights from hitting the road surface, whilst still using the weight of the bikes to bring the bike platform back up to level in a controlled manner. However, this geometry does not allow the opening of high vertical tailgates – e.g. VW Transporter T5 and T6.

Bicycle transport

Wheel holders will fit all wheel bases, even small wheels

Long wheel tire padded wheel straps hold tires up to 3.25" wide; pull to tighten and loosen to quick release

The Eazzy 2 is suitable for carbon frame bikes; the rubber padded bike mount cradles rotate 360 ​​degrees and use rubber padded straps to hold all types of frames firmly but gently.

The maximum allowable load is 40 kg, and a bicycle must not weigh more than 20 kg.

Although the Eazzy series is not optimized for e-bikes, it can carry electric bikes up to 20 kg (see E-Scorpion for e-bikes); whatever your bike, always load it closest to the vehicle. If there is a weight difference between 2 bikes, make sure the heavier one is loaded closer to the vehicle.

There is a built-in locking cable to secure your bikes; cable locks are just a deterrent, not a full security measure.

Other features and basic specifications

The patented tapered joint fits all tow balls, sometimes even bolt-on tow balls that do not meet neck length or ball diameter standards.

Eazzy 2 sits in an elevated position on the tow ball, away from speed bumps and other hazards such as steep ferry ramps.

Dimensions: 112cm wide x 58cm deep (measured from centre of tow ball to outer edge of number plate holder). 24cm wide when folded.

Weight: 11.6 kg

Build quality - tube bending, welding, rust prevention, painting, component quality is exemplary. All the tools you could possibly need are included.

TECHNICAL SPECIFICATIONS

Maximum number of bikes: 2

Maximum weight per bike: 20kg

Maximum load capacity: 40kg

Maximum tire size: 3.25″

Suitable for all ISO 50mm tow ball.

Dimensions (width x depth x height): 113 x 57.5 x 70 cm

(measured from the center of the tow ball to the outside edge of the license plate holder).

Weight: 11.6 kg

Tilt : Yes

Integrated lighting panel: Yes

Lighting board plug type: 13 pin

Tow ball lock: Yes

Bike carrier - bike lock: Yes

The maximum permitted load you can carry is also determined by the towbar nose weight; you will need to check you do not exceed this before using any ball mounted bike carrier.

Requires 65mm clearance from the centre of the tow ball to the rear of the vehicle.