Buzz Rack Eazzy 3 Drawbar Bike Carrier 101444

Buzz Rack Eazzy 3 Drawbar Bike Carrier
The fully collapsible EAZZY series offers convenient assembly, user-friendly functions and compact storage. The ratchet sled is the perfect solution to securely fasten your bike.
It's also a great solution for bikes with carbon frames, as it doesn't put pressure on the carbon pipes.
BUZZRACK Eazzy 3 is a really well thought out and designed kit; a smart, sophisticated and value-for-money product.
EAZZY 3 has been awarded the 2019 BRISBANE GOLD DESIGN AWARD.

Basic ergonomics
Easy! Eazzy 3 is very easy to fold, which offers easy removal, easy transport, easy assembly, easy storage in the car trunk when you go out for a ride.
It can be folded to be stored in the car. This is really useful because with a carrier mounted on the vehicle, other vehicles can damage your carrier and towbar in their parking lot. A tow bar carrier will certainly make your vehicle too tall for a standard parking lot.

More details about folding: The wheel holders can be folded towards the main body and connected with a belt, making it easier to transport with the wheels under the main body. Eazzy 3 is very easy to carry, easy to put on and take off and store. The metal parts are steel, not aluminum, but since it is lifted vertically with 2 hands, it feels surprisingly light and there should be no strain on your back as you move it and put it on.

Key features of Eazzy 3:
Assembly: Eazzy 3 comes fully assembled. All you have to do is replace the lamps and license plate holder with only 1 screw on each side.

Attachment to vehicle: You can fit the Eazzy 3 comfortably in the folded state, giving you all the space you need to work on the drawbar attachment system. It supports itself when you first place it in the tow ball - you can let it go and it won't fall to the ground. You can then take the weight back up, turn the spin wheel until it's tight and lock it. BUZZRACK's carriers conform to the rigorous standard XPR-18-904-4 and therefore include an anti-sway tensioner; it has an integrated handle and usually 2 or 3 turns are sufficient. The video below demonstrates vehicle installation and bike setup.
Lighting system: The Eazzy 3 comes with a 13-pin lighting system including a reversing light and UK compatible fog lights. 13 pin to 7 pin adapter not included.
Tilt: Tilt is easy and stabilizes very well even at full load. The Eazzy 3 is quite high above the towball, and the tilt function is optimized to prevent the lights from hitting the road surface, while still using the weight of the bikes to bring the bike platform back to level in a controlled manner. However, this geometry does not allow high vertical tailgates to be opened - e.g. VW Transporter T5 and T6.

Bicycle transport:
Wheel holders will fit all wheel bases, even small wheels
Long wheel rubber padded wheel belts hold tires up to 3.25 inches wide; pull to tighten and loosen to quick release
Suitable for Eazzy 3 carbon frame bikes; The rubber padded bike mounts can rotate 360 ​​degrees and, again, using rubber padded straps, firmly but gently hold any frame type.
The maximum allowable load is 60 kg, and a bicycle must not weigh more than 20 kg.
Although the Eazzy series is not optimized for e-bikes, e-bikes weighing up to 20 kg can be carried (see E-Scorpion for e-bikes); Whatever your bike is, always load it closest to the vehicle. If there is a weight difference between the 2 bikes, make sure the heavier one is loaded in the compartment closer to the vehicle.
It has a built-in locking cable to secure your bikes; cable locks are only a deterrent, not a complete security measure.

Other features and key features:
The patented conical link fits all towballs, sometimes even bolt-on towballs that do not meet neck length or ball diameter standards.
The Eazzy 3 sits in a high position on the towball, away from speed bumps and other hazards such as steep ferry ramps.
Dimensions: 112cm wide x 78cm deep (measured from center of tow ball to outer edge of license plate holder). 24 cm wide when folded.
Weight: 16.6 kg
Build quality - tube bending, welding, rust prevention, painting, component quality is exemplary. All the tools you may need are included in the product content.

TECHNICIAL SPECIFICATIONS
Maximum number of bikes: 3
Maximum weight per bike: 20kg
Maximum load capacity: 60kg
Maximum tire size: 3.25″
Fits all ISO 50mm tow ball.
Dimensions (width x depth): 113 x 75 cm
(measured from center of tow ball to outer edge of license plate holder).
Weight: 16.6 kg
Deposit : Yes
Integrated lighting board: Yes
Lighting board plug type: 13 pin
Tow ball lock: Yes
Bike carrier - bike lock: Yes

The maximum allowable load you can carry is also determined by the drawbar nose weight; You will need to check that you do not exceed this before using any ball-mounted bike carrier.
Requires 65mm clearance from the center of the drawbar to the rear of the vehicle.